l
REQUIREMENTS:
1.UNA,,LAKAS NG LOOB
2.CROSS SCREW DRIVER
3.CUTTER
4.COATED THIN WIRE
5.SOLDER
6.SCOTCH TAPE OR ADHESIVE ETC..
7.CHARGING PIN 3310,, OPTIONAL..
8.PINAKA IMPORTANTE SA LAHAT
1.UNA,,LAKAS NG LOOB
2.CROSS SCREW DRIVER
3.CUTTER
4.COATED THIN WIRE
5.SOLDER
6.SCOTCH TAPE OR ADHESIVE ETC..
7.CHARGING PIN 3310,, OPTIONAL..
8.PINAKA IMPORTANTE SA LAHAT
No comments:
Post a Comment