Nokia 1616 lcd display led lights problem solution ways jumpers.

Nokia 1616 lcd display led lights problem solution ways jumpers can be found in this diagram that is given bellow all track of led lights in nokia 1616 is given in this diagram and defined with different colors so can be found easily by visitors.so make these jumpers and check all this track and components that are used in diagram to solve led light and display lights solution with jumpers in nokia 1616.



for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Nokia 1616 no signal

1616 light jumper

 

Nokia 1616 All solution here

Nokia 1616 charging not supported or local mode test mode solution.
 
 Nokia 1616 charging no response solution
 
 Nokia 1616 fake charging or not charging solution
 
 Nokia 1616 lcd & keypad light solution
 
Nokia 1616 torch light solution

Nokia 1616 ringer & speaker solution

Nokia 1616 mic solution

Nokia 1616 insert sim solution

Nokia 1616 lcd solution
 
Nokia 1616 network solution

Nokia 1616 handsfree solution

Nokia 1616 display ways

Nokia 1616 MiC 100%

1616 no power solution

1616 no power solution

Nokia 1616 all solution

 

Nokia 1616 all solution Download

nokia 1616 dead solution

 

nokia 1616 dead solution

Nokia 1616 Keypad and LCD screen display backlight problem solution

Nokia 1616 LCD screen display and keypads LED back light problem solution

Here's the step by step hints on how to fix the Nokia 1616 LCD screen and keypad LED problem:
This may only works assuming that you already tried the software or firmware calibration but nothing happens.  So here's the hardware repair as follows:
1. Check the VBAT 3.7V supply voltage across the two inductor coils. Check also this coils if damaged, then replace.
2. Check the the Keypad backlight LED bulb below the the circuit. If that white LED bulb is damaged the LCD backlight will also not light up or glow. So ensure that its perfectly working or replace with a new one.
3. Trace the connection line paths of the LED+ and LED- to the spots were it is being connected. There is a test spots given on the PCB board where you can check the supply voltage of the LCD backlight LED.
4. Check the switching transistor, there are two 2.2 ohms resistors which is connected to ground, replace if found damaged or faulty.
5. If all of the above procedures has been done and seems there is no problem,. You may then replace the LCD if the LCD shows a dark screen. there is a tendency that the LCD's LED is already damaged. 
You can also trace the backlight LED connection from the test spots down to the PINS or solder pads of the LCD screen, just to ensure that this connection is not open or cut-off.

Nokia 1616 Keypad and LCD screen display backlight problem solution

Nokia 1616 LCD screen display and keypads LED back light problem solution

Here's the step by step hints on how to fix the Nokia 1616 LCD screen and keypad LED problem:
This may only works assuming that you already tried the software or firmware calibration but nothing happens.  So here's the hardware repair as follows:
1. Check the VBAT 3.7V supply voltage across the two inductor coils. Check also this coils if damaged, then replace.
2. Check the the Keypad backlight LED bulb below the the circuit. If that white LED bulb is damaged the LCD backlight will also not light up or glow. So ensure that its perfectly working or replace with a new one.
3. Trace the connection line paths of the LED+ and LED- to the spots were it is being connected. There is a test spots given on the PCB board where you can check the supply voltage of the LCD backlight LED.
4. Check the switching transistor, there are two 2.2 ohms resistors which is connected to ground, replace if found damaged or faulty.
5. If all of the above procedures has been done and seems there is no problem,. You may then replace the LCD if the LCD shows a dark screen. there is a tendency that the LCD's LED is already damaged. 
You can also trace the backlight LED connection from the test spots down to the PINS or solder pads of the LCD screen, just to ensure that this connection is not open or cut-off.

nokia 1616 dead solution

 

nokia 1616 dead solution

Nokia 1616 all solution

 

Nokia 1616 all solution Download

1616 no power solution

1616 no power solution

Nokia 1616 MiC 100%

Nokia 1616 display ways

Nokia 1616 All solution here

Nokia 1616 charging not supported or local mode test mode solution.
 
 Nokia 1616 charging no response solution
 
 Nokia 1616 fake charging or not charging solution
 
 Nokia 1616 lcd & keypad light solution
 
Nokia 1616 torch light solution

Nokia 1616 ringer & speaker solution

Nokia 1616 mic solution

Nokia 1616 insert sim solution

Nokia 1616 lcd solution
 
Nokia 1616 network solution

Nokia 1616 handsfree solution