Nokia E7 reset

Nokia E7 hard reset

Press menu button > Settings > Phone > Phone management > Factory settings > Delete data and restore > YES

OR

You can format your device by typing *#7370# in standby mode. Before the device is reset, you need to provide the lock code. The default lock code is 12345.

IMPORTANT!

Formatting the device will permanently erase all user data and settings as well as add-on applications and operator specific settings.

The Nokia E7 contents of the SIM card and memory card (MMC) are not erased during formatting

Nokia c6 reset

Solved: How to hard reset Nokia C6: With the phone turned off, press both CALL + END key +....

Nokia C6 hard reset

With the phone turned off , press both CALL + END +..CAMERA keys together


OR
Try this code: *#7380#


Restart the Nokia C6 phone: switch off the device, and remove the battery. After about a
minute, replace the battery, and switch on the device.
• Restore the Nokia C6 original factory settings
You may want to reset some of the settings to their original values. All active calls
and connections must be ended.
Select Menu > Settings and Phone > Phone mgmt. > Factory settings. To
restore the settings, you need to enter the Nokia C6 lock code 12345
If the device asks for a PIN code or lock code, enter it, and select OK. To delete
a number, select . The factory setting for the lock code is 12345.
After resetting, the device may take a longer time to switch on. Documents and files
are unaffected.
Your documents and files will be deleted in the reset, so back up your data first.
• Update your device software regularly for optimum performance and possible
new features, as explained in the user guide.

Lenovo ET960 reset

hard reset Lenovo ET960

Press Today + Camera + End buttons keys + RESET

Samsung B7620 Armani reset

Samsung B7620 Giorgio Armani hard reset

Press and hold both W&L + LOCK key + CALL + POWER buttons together.
W&L button is on the top of GT-B7620 and Lock key is located on the rightside of Samsung B7620 phone

or
USE THIS METHOD FOR hard reset your Samsung B7620 Giorgio Armani phone:press *2767*3855#
or
MENU > Settings > Memory Settings
Clear Memory: delete all data and reset all settings to the manufacturer’s defaults.

Toshiba Portege G710 reset

Toshiba Portégé G710 soft reset

Restarting your Toshiba phone
If you have any problems, such as the phone
freezing, restart the phone.
To restart the phone:
1. Press and hold the Power key to switch off
the phone.
2. Wait a few seconds, then switch on the
phone.
IMPORTANT: If you restart your Toshiba
phone, data that you have not saved will be
lost.
there is still a problem:
1. Remove the battery.
2. Re-insert the battery, then switch on the
phone on.

Toshiba Portégé G710 hard reset

Remove SIM card.
With G710 turned off press and hold left soft key + END key + POWER on the Toshiba G710 phone

Resetting your Toshiba G710 phone

For details of resetting your Toshiba phone, refer
to Master Clear in Settings.
We recommend that you back up all of your data
before resetting your Toshiba phone.
IMPORTANT: It is recommended that you
frequently back up the data on your
Toshiba phone.

Nokia 5230 reset

Nokia 5230 hard reset

Restore the original factory settings

Restore original settings
Select Menu > Settings and Phone > Phone mgmt. >
Factory settings.
You can reset some of the settings to their original values. To
do this, you need the lock code.
After resetting, the device may take a longer time to power
on. Documents and files are unaffected.

Nokia 5230 hard reset with buttons / keys

Press and hold GREEN + RED + CAMERA when powering up, then
input default 12345 security code.

or
Enter     *#7370# 

Reset the Nokia 5230 device

1. Switch off the device. 2. Remove the battery. 3. After a few seconds, re-insert the battery, and switch on the device.

Samsung M900 Moment reset

Samsung M900 Moment hard reset

To reset the SPH-M900 (Moment)

1. Tap the Applications Tab and then tap Settings
2. SD Card & Phone Storage
3. Tap Factory Data Reset > Reset Phone

1. Press > and tap >
SD card & phone storage > Factory data reset. (You
will see a disclaimer.)
2. Read the disclaimer and tap Reset phone.
3. If required, draw your unlock pattern to confirm the
reset process.

Samsung moment hard reset with key combo

With the Samsung m900 phone turned off hold VOLUME DOWN + CALL + END CALL buttons > Master reset

Samsung S5230 reset

How to reset Samsung S5230 Star hard reset

To hard reset your Samsung S5230 phone:
press *2767*3855#
 OR

Press MENU > Settings > Reset settings > Sellect All (or what you want) and select YES

or
Download mode=(With the Phone turned off) VOLUME DOWN / or UP + POWER (To QUIT press power off for 3-4 sec)

HTC Sensation reset

Solved: How to reset HTC Sensation hard reset: With the phone turned off, press and hold the VOLUME DOWN button, and then...

Restarting or factory resetting your  Sensation  phone

Restarting your phone (soft reset)
If your phone is running slower than normal, an application is not performing properly, or your phone becomes unresponsive, try restarting your phone and see if that helps solve the problem.

If the display is off, press the POWER button to turn it back on.
Unlock your phone if the Lock screen is displayed.
Press and hold the POWER button, and then tap Restart.
When asked to confirm, tap Restart.
If you can’t restart the phone following the above steps, remove the battery, wait for a few seconds, reinsert the battery, and then turn the phone on.

Performing a HTC Sensation factory reset using phone buttons keys

If you can’t turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.

If you’re passing your phone on to someone else or your phone has a persistent problem that cannot be solved, you can do a factory reset (also called a hard reset). This returns your phone to the state it was in before the first time you turned it on.
Factory reset will not erase the data and files that are on the storage card.
Factory reset is not a step to be taken lightly. It’ll permanently delete all your data and customized settings, and will remove any applications you’ve downloaded and installed. Be sure to back up any data and files you want to keep before you do a factory reset.

Performing a HTC Sensation factory reset via settings

From the Home screen, press MENU, and then tap Settings.
Tap SD & phone storage > Factory data reset.
On the Factory data reset screen, tap Reset phone, and then tap Erase everything.

LG Invision CB630 reset

Resetting LG Invision CB630

To Perform LG Invision Master Reset

Reset Settings Menu 9.#
This function allows you to restore factory
settings. To do this, you need the security
code.
Master Reset (Menu 9.#.1)
Restores the settings (e.g.: Audio, Display,
Language, Date & Time, Bluetooth
Settings) stored in the handset memory to
default values.
Master Clear (Menu 9.#.2)
Deletes downloaded/user created
contents (e.g.: images, videos) from
Handset content and the External
Memory card.
] Handset
- Deletes all downloaded/user created
Images, Videos & Sounds from the
Handset Memory.
- Restores Personal Information stored
in the handset memory (e.g.: address
book, messages, tasks, alarm,
Calendar schedules) to default values.
- Resetores the settings stored in the
handset memory to default values.
] Memory Card: Deletes all contents from
the External Memory Card.

LG Incite reset

Resetting LG CT810 Incite
Press and hold both VOLUME DOWN + CAMERA + END buttons (POWER ON LG Incite device).

OR
Go to Start > Settings> System tab > Clear storage > Enter password 1234 in both password fields.

Samsung S5830 Galaxy ACE reset

How to reset Samsung S5830 Galaxy ACE  phone

Samsung Galaxy Ace S5830 hard reset key combo

Warning! All your data will be lost! Back UP everything first.

+ 

Press and hold HOME + POWER/LOCK buttons together.

OR
To hard reset your Samsung S5830 Galaxy ACE phone:
press *2767*3855#
 OR
You can also use
Clear storage: Erase the credential contents from the
device and reset the password.

Samsung Galaxy Ace S5830 soft reset

To soft reset your Samsung Galaxy ACE android phone simply take out the battery and reinsert it.

LG Optimus 2X reset

Hard reset LG Optimus 2X P990 clean reset

WARNING: All of your data will be lost!
When the phone is turned off, press and hold the Power + Volume down keys at the same time (for over ten seconds), the
phone will turn on and perform factory reset immediately

LG P350 Optimus ME reset

Hard reset LG P350 Optimus ME full reset

WARNING: All of your data will be lost!
If user turns on the phone by pressing and holding End Key + Send Key + Down volume key at the same time (for 10
seconds), the phone will turn on and perform hard reset immediately.
Please note, after you perform the Hard Reset, all your data and applications on your phone
will be erased and cannot be reversed.

Turn off your phone and reboot. While your phone is powering back on, press and hold the Send key while the
Android Logo is displayed.
Your P350 phone will boot all the way to the main screen and display "safe mode" in the lower left-hand corner.

Samsung i997 Infuse 4G reset

Samsung i997 Infuse 4G hard reset

Samsung i997 Infuse 4G hard reset

All data will be lost!
Press and hold VOLUME UP + DOWN + POWER on i997, release only POWER key, but keep pressing VOL +/- for 8 sec., in recovery menu (Vol DOWN to highlight, POWER key to select) then select Delete all user data.

 or Tap Applications ➔ Settings ➔ Location and security. Tap Clear storage.

Infuse 4G Safe mode

1. Make sure your phone is turned off.
2. Press and hold the power key to boot up your device.
3. After the “Rethink Possible” letters change from blue to black, continually tap the MENU key.
When the Home screen is displayed, Safe mode is displayed in the lower left corner of the screen.

HTC Touch Pro

HTC Touch Pro Soft reset

Resetting Your Device

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work
will be lost.

To perform a soft reset

1. Pull out the stylus.
2. Use the stylus tip to press the RESET button located at the bottom of the device. Your device restarts and displays the Home screen.

HTC Touch Pro hard reset

You can also perform a hard reset (also known as a full reset). A hard
reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.


Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a hard reset

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:



4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

Clear Storage

You can also use Clear Storage to reset your device back to factory default settings.

1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

HTC Touch Pro 2 Rhodium

HTC Touch Pro 2 Rhodium Soft reset

Resetting Your Device

Performing a soft reset

Perform a soft (normal) reset to clear all active program memory and shut down all active programs. This is useful when your device is running slower than normal, or a program is not performing properly. If a soft reset is performed when programs are running, unsaved work is lost.

To perform a soft reset

1. Pull out the stylus.
2. Remove the back cover.
3. Use the stylus tip to press the RESET button located at the upper-left side of the open back panel.
Your device restarts and displays the Home screen.
4. Replace the back cover and insert the stylus back into its compartment.

HTC Touch Pro 2 Rhodium hard reset

Performing a hard reset

If a normal reset does not solve a system problem, you can perform a hard (full) reset. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on. You will lose any programs you installed, data you entered, and settings you customized on your device, and only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the operating system. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.


To perform a Touch Pro 2 hard reset
1. With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see this message on the screen.

2. Release the TALK/SEND, END and POWER buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Using Clear Storage
If you can access the device settings, you can use Clear Storage to reset your device back to factory default settings.
1. Tap Start > Settings, and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

HTC Touch Viva Opal

HTC Touch Viva Opal Soft reset

Resetting HTC Opal

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not
performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

To perform a soft reset
1. Pull out the stylus.
2. Remove the back cover.
3. Use the stylus tip to press the red RESET button located at the top,
back of the device. Your device restarts and displays the Home screen.

Touch Viva Hard reset

You can also perform a hard reset (also known as a full reset). A hard reset shouldonly be performed if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a HTC Touch Viva Opal hard reset

1. Remove the back cover and then pull out the stylus.
2. With the device turned on, press and hold the TALK/SEND and END buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the TALK/SEND and END buttons until you see this message on the screen:

4. Release the TALK/SEND and END buttons, then press the TALK/SEND button
to perform the hard reset, or press any other button to cancel the reset.

Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

HTC Trinity (P3600) reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a soft reset

• Use the stylus to press the RESET button found at the bottom center part of your device. Your device restarts and displays the Today screen.

 

To perform a hard reset

1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom center part of your device.
2. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press SEND to restore factory default, press END to quit.“
3. Press on your device. 
   Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

HTC TyTN Hermes reset

HTC TyTN soft reset

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a soft reset

• Use the stylus to lightly press and hold the RESET button onthe bottom of your device. Your device restarts and displays the Today screen.

 

HTC Kaiser TyTN II P4550

HTC Kaiser soft reset

Resetting Your Device

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

To perform a soft reset

Use the stylus to press the RESET button found at the bottom of your device. Your device restarts and displays the Today screen.

HTC Kaiser hard reset

You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a hard reset using device keys

1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:

3. Release the two SOFT KEYs, and then press the button on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

To perform a hard reset using Clear Storage

1. Tap Start > Settings > System tab > Clear Storage.
2. Type “1234” in the box and   tap YES.

HTC Universal reset

HTC Universal Soft reset

Resetting Your Pocket PC Phone

Occasionally you may need to reset your Pocket PC Phone. A normal (or soft) reset of your device clears all active program memory and
shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A
soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will
be lost.
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a
system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it
on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software
and other pre-installed programs will remain.

HTC Universal Soft reset

To perform a HTC Universal soft reset

• Use the stylus to lightly press and hold the RESET button on the left side of your device.
The device restarts and displays the Today screen.

Warning! Always turn off your device before performing a soft reset or installing/replacing the battery and SIM card.

HTC Universal hard reset

To perform a HTC Universal hard reset

• Press and hold both SOFT KEYS shown enclosed by circles in the picture below. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the left side of your device. Press either 0 to restore to factory default or X to exit the hard reset process.

HTC Vox (S710) reset

Resetting Your Phone

Resetting your phone will remove all the data from its memory and restore the phone back to the factory default settings.

WARNING! All your data will be deleted, it is recommended that you back up your data first before resetting your phone.

To reset your phone

1. Click Start > Expert > Clear Storage.
2. Follow the on-screen instructions to reset the phone.

The phone will restart after it has been reset.

The phone will restart after it has been reset.

HTC S710 Hard reset with keys
Turn off your phone, then press both SOFT KEYS and press POWER button.
Release SOFT KEYS.
Press the GREEN PHONE button for hard reset confirmation.

Qtek 1010 reset

Reset the Pocket PC Phone and Clear Memory
You can perform a soft reset or a full reset – a soft reset restarts your device and a full reset switches the battery off. The result of a soft reset is that some data may be lost in programs that are open, however, the result of cutting power is to wipe all the data and new programs you have added, and return the device to factory setting – i.e. it will only have the software that was present when you bought it. On this basis, it is important not to think about a full reset as you would restarting, shutting down or even switching off improperly your desktop, but rather like a complete crash requiring you having to wipe your OS. The importance of backing up data to a SD card or your computer cannot be stressed enough - in the event you have to perform a full reset your data will not be lost.
To perform a soft reset:
If your Pocket PC Phone responds slowly stops responding or freezes, try soft resetting it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in open windows may be lost.
• Use the stylus to press and hold the Reset button.
1. Soft Reset. Press into the hole with the end of your stylus to reset your device

To perform a full reset - hard reset:
A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, while data you have created and programs you have installed are erased.
1. Unscrew the stylus and use the smaller point of the top-half.

2. Press the battery switch once to turn it off, and then once more to turn it back on.

HTC Wildfire reset

HTC Wildfire hard reset

Solved: How to hard reset HTC Wildfire: With the phone turned off, press and hold the VOLUME DOWN button, and then...

Restarting or factory resetting your HTC Wildfire phone

If your phone becomes unresponsive or sluggish, try restarting your phone and see if that helps.
In case your phone has a persistent problem that cannot be solved, the last resort is to do a factory reset.

Restarting your HTC Wildfire phone (soft reset)

If your phone is running slower than normal, an application is not performing properly, or your phone becomes unresponsive,
try restarting your phone and see if that helps solve the problem.
To restart your phone, simply turn it off and back on. If pressing and holding the POWER button doesn’t work, then remove the battery,
wait for a few seconds, reinsert the battery, and then turn the phone on.

Performing a HTC Wildfire factory reset (Wildfire hard reset)

HTC Wings (S730) reset

HTC Wings S730 Soft reset

Restarting your Phone
Restart your phone when a program is not performing properly or the phone is not responding to any keypresses.

To restart the phone

1. Remove the battery.  
2. Wait for three seconds, then reinsert the battery and turn on your phone.

WARNING! If the phone is restarted while a program is running, unsaved work will be lost.

HTC Wings S730 Hard reset

Press and hold both soft buttons + press POWER button for 1 sec.

Resetting your Phone

Resetting your phone will remove all the data from its memory and restore the phone back to the factory default settings.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, performing a hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

WARNING! All your data will be deleted, it is recommended that you back up your data first before resetting your phone.

To reset your phone

1. Click Start > Expert > Clear Storage. 
2. Follow the on-screen instructions to reset the phone. The phone will restart after it has been reset.

HTC Wizard (Prodigy) reset

Resetting Your HTC Wizard

Occasionally you may need to reset your Wizard. A normal (or soft) reset
of your device clears all active program memory and shuts down all
active programs. This can be useful when the device is running slower
than normal, or a program is not performing properly. A soft reset is
also necessary after the installation of some programs. If a soft reset is
performed when programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve a
system problem. After a hard reset, the device is restored to its default
settings � the way it was when you first purchased it and turned it
on. Any programs you installed, data you entered, and settings you
customized on the device will be lost. Only Windows Mobile software
and other pre-installed programs will remain.

To perform a soft reset

� Use the stylus to lightly press and hold the RESET button on
the left side of your device. The device restarts and displays the
Today screen.

Warning! Always turn off your device before performing a soft reset or
installing/replacing the battery and SIM card.

To perform a hard reset

1. Press and hold the Comm Manager button and Voice Command
button on the device. At the same time, use the stylus to lightly
press the RESET button.

2. Keep the Comm Manager button and Voice Command button
pressed, and the following message will appear on the screen:



3. Release the two buttons, and press the Send button to perform a
hard reset.

HTC Oxygen (S310) reset

Restarting your Phone - Soft reset 
Occasionally, you may want to restart your phone, for example, when a program is not performing properly or the phone does not respond to any key presses.
To restart the phone

1. Remove the battery. 
2. Reinsert the battery and turn on your phone.

Warning! If the phone is restarted while a program is running, unsaved work will
be lost.
Resetting your Phone - Hard reset 
Resetting your phone will remove all the data from its memory which include contacts, tasks, calendar appointments and more, and restore the phone back to the factory default settings.
To reset your phone

1. Click Start > Accessories > Clear Storage. 
2. Follow the on-screen instructions to reset the phone. The phone will restart after it has been res

HTC MTeoR (Breeze) reset

Restarting your Phone
Occasionally, you may want to restart your phone, for example, when a program is not performing properly or the phone does not respond to any keypresses.
To restart the phone - Soft reset 

1. Remove the battery. 
2. Reinsert the battery and turn on your phone.

WARNING! If the phone is restarted while a program is running, unsaved work will be lost.
Replace the battery

1. Align the exposed metal contacts on the edge of the battery with the prongs in the body of the phone then gently push the top of the battery into place. 
2. Slide the cover on the phone.

Resetting your Phone
Resetting your phone will remove all the data from its memory which include contacts, tasks, calendar appointments, and more, and restore the phone back to the factory default settings.
WARNING! All your data will be deleted, it is recommended that you back up your
data first before resetting your phone.
To reset your phone - Hard reset 

1. Click Start > Accessories > Clear Storage. 
2. Follow the on-screen instructions to reset the phone.

The phone will restart after it has been reset

HTC Magician reset

Find out how to hard reset HTC Magician: Press and hold the power button, and then use the..

Resetting Your Pocket PC Phone

(HTC Magician, Qtek S100, i-Mate Jam, Dopod 818, O2 XDA-II Mini, T-Mobile MDA Compact, Orange SPV M500
Vodafone v1620/VPA III)
You can perform a soft reset or a full reset. During a soft reset, the device is restarted and only some data in opened programs may be lost. However, a full reset turns the battery off, returns the device to its original factory settings, and deletes all programs, files, contacts and other information you have saved to the device. Therefore, it is extremely important to back up data to a storage card or your computer on a regular basis in the event that a full reset has to be performed.
To perform a soft reset
If your Pocket PC Phone responds slowly, stops responding, or freezes, you can soft reset it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in any opened applications may be lost. Use the stylus to press and hold the Reset button, as shown below.

To perform a T-Mobile Compact full reset

A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset.

HTC Magic

Resetting the HTC Magic

Resetting the phone deletes all data, including downloaded applications, and the phone back to its initial state—the state before you turned on the phone for the first time.
Important Make sure to back up important data you have on the phone before you perform a factory data reset.

To reset the phone


1. Press HOME > MENU, then touch Settings.
2. Scroll down the screen, then touch SD card & phone storage.
3. Navigate to the Internal phone storage section, then touch Factory data reset.
4. On the Factory data reset screen, touch Reset phone and then touch Erase everything.

( To reset the HTC Magic phone using phone buttons scroll down)

HTC Magic hard reset

Factory reset