Showing posts with label NOKIA 1280. Show all posts
Showing posts with label NOKIA 1280. Show all posts
Nokia 1280 dead solution
Nokia 1280 Dead,Done by MX-key...
first time makpag flash nitong unit na ito...dalang parin kasi.....
Procedure:
Open MX-key
Connect your UFS
Go to DCT4 TAB and check X-GOLD
Select MCU,PPM at CNT
Check Emulation(kung dead pagka Flash uncheck ang emulation)
Fullfactory reset
DONE!!!!!!
Screenshot:
first time makpag flash nitong unit na ito...dalang parin kasi.....
Procedure:
Open MX-key
Connect your UFS
Go to DCT4 TAB and check X-GOLD
Select MCU,PPM at CNT
Check Emulation(kung dead pagka Flash uncheck ang emulation)
Fullfactory reset
DONE!!!!!!
Screenshot:
 |
|
|
Nokia 1280 ON-OFF Power Key Jumper
Here's a full solution for a damaged Nokia 1280 ON and OFF key problem. This problem may result to unable the device to turns on but it shows charging indication when the battery charger is being plug-in.
The solution below shows the entire Nokia 1280 ON/OF key connection tracks which can be used for easy troubleshooting.
If the Nokia 1280 On-Off key may not working, you can trace its connection line paths as shown on solution above. Just apply a jumper wire if the line tracks is open or cut.
The solution below shows the entire Nokia 1280 ON/OF key connection tracks which can be used for easy troubleshooting.
Nokia 1280 On-Off Jumper Ways and Line Tracks
If the Nokia 1280 On-Off key may not working, you can trace its connection line paths as shown on solution above. Just apply a jumper wire if the line tracks is open or cut.
Nokia 1280 ON-OFF Power Key Jumper
Here's a full solution for a damaged Nokia 1280 ON and OFF key problem. This problem may result to unable the device to turns on but it shows charging indication when the battery charger is being plug-in.
The solution below shows the entire Nokia 1280 ON/OF key connection tracks which can be used for easy troubleshooting.
If the Nokia 1280 On-Off key may not working, you can trace its connection line paths as shown on solution above. Just apply a jumper wire if the line tracks is open or cut.
The solution below shows the entire Nokia 1280 ON/OF key connection tracks which can be used for easy troubleshooting.
Nokia 1280 On-Off Jumper Ways and Line Tracks
If the Nokia 1280 On-Off key may not working, you can trace its connection line paths as shown on solution above. Just apply a jumper wire if the line tracks is open or cut.
Subscribe to:
Posts (Atom)